autosupermart.com

Ted · Guest

I ordered PC 7424 polisher. I am wondering how do you apply wax paste from can to the machine polisher pad?

Thanks,
Ted

Guest · Posted: Sat Oct 04, 2003 8:28 am Post subject:

It would be MUCH easier to use liquid...

Guest · Posted: Sat Oct 04, 2003 8:30 am Post subject:

...just to add.
If you :must" use paste wax, use a plastic scraper or bondo spreader to get the wax from the can to the pad..
Just to note, I never wax with a PC, I only use it for polishing, etc.
I "save" waxing/sealing for hand application and removal.

Loggie31 · Joined: 20 May 2002 Posts: 177

First you should use liquid polish, wax or cleaner. First spray a little bit of water on the foam this will prevent any paint burning or bloting. Next squirt or pour the product on the car, not to much. Then without turning on the machine work the foam into the product, this is called charging the foam. Finally, place the PC flat on the car and check the adjustment setting, should be no higher then 3 1/2 and turn it on. Work the foam in a sideway 8 back and forth. I have further instructions but this program won't let me send them. Good luck!